In linux the lspci command shows this info. The most reliable info is to set the controler to RAID mode, boot some OS (Linux comes in small handy formats) and check the PCI id there. You can also try to look it up on this web site. * the 1002/4392 is the PCI id of the RAID controller when set to RAID mode. (after it worked, I went to Device Manage again and set the driver for IDE controller back to the correct one: Update driver, select automatically.)
restart, in BIOS change mode again to RAID. start "regedit" and in key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\pci#ven_1002&dev_4392 change the value Service to ahcix86s (see note below). set RAID controller mode back to AHCI in BIOS. boot Windows, fails again, the same way as before. Reboot, set RAID controller mode to RAID in BIOS and select the above INF file and then the driver. Then in Device Manager I selected to Update the driver of the IDE controller, "let me select the driver", Have disk. in the RAID driver INF file (ahcix86s.inf) I added a line with this ID:īefore: %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4392. in Device Manager I looked up the PCI ID of the IDE controller (it was 439C) (select Properties on the controller, the ids are on the tab Details, under HardwareId in dropdown menu). I picked the (unused) IDE controller as a scapegoat for the RAID driver. Try to boot Windows, it fails (it reboots during startup, no error message is visible) I added 2 more hard drives (connected them to the RAID controller ports), set RAID controller mode to RAID, and set up some RAID arrays on the 2 new HDs (all this in BIOS setup). RAID controller set to AHCI mode, Windows 7 installed on the first (and only) HD. additional IDE/SATA controller with 2 ports (for eSATA and optical drive, I guess) (from now on "IDE controller"). 
one hard drive connected to the RAID controller.a PC with an AMD SB820M chipset - 4 SATA/RAID ports (I'll refer to this controller as "RAID controller" from now on).As I did several tries, I can not be sure what steps are necessary and what not, so I'll list everything I did.
0 kommentar(er)
